Connect with us
       

Uncategorized

Honda unveil CRF450R

A CRF450R rundown!

Published

on

The 2017 CRF450R has been developed – with direct input from Honda’s AMA and MX GP teams – to be first out of the gate, first into turn 1 and to punch a blistering lap time. With a new engine packing an 11% increase in peak power matched to a chassis that can truly make full use of it, the 2017 CRF450R is stronger, sharper and more focused.

And as MX1-class machines are all about competition, both 16YM and 17YM machines were raced back to back by HRC in a series of start simulations. The power and drive of the new bike saw it gain a significant advantage. 0-10m took 1.53s, 6.4% less time than the outgoing machine.

The new power unit uses innovative engineering on both intake and exhaust side. On the intake, straight passageways reduce air resistance significantly for improved combustion efficiency. On the exhaust side, the twin pipes divide close to the engine, facilitating the increase in compression ratio from 12.5 to 13.5, a key element in the greater power output.

A 49mm Showa USD fork – steel sprung and developed from a race-ready factory item supplied to MX race teams in the Japanese championship – replaces the KYB air fork. The aluminium frame’s main spars are now tapered for more front-end stability and traction, and the 17YM CRF450R has completely revised geometry; it’s shorter in wheelbase, with a more compact swingarm and adjusted rake and trail. It also has a lower centre of gravity thanks to details like a lightweight titanium fuel tank and lower upper shock mount.

Enlarge

76075_17YM_CRF450R

Honda Europe

Brand new plastics create ultra-efficient aerodynamic performance, and a smooth, ‘organic’ shape to give the rider ultimate freedom to move. They also feature film insert graphics, which deliver sharp visuals and a durable finish. For the first time, electric start is now available as an option.

Engine

The CRF450R’s 449cc engine now makes a full 11% more top end power than the outgoing model. Overlaid, the power and torque curves of the 16YM and 17YM graphically display the performance gain of the new design: it’s stronger everywhere but especially through the midrange torque area and at the top end, with a major increase in rpm, peak power and over-rev.

To produce this gain in output every aspect of the engine’s performance was painstakingly developed together with HRC’s engineers. The cylinder head features a completely redesigned Unicam four-valve head, with a finger rocker arm on the inlet valves increasing valve lift by 0.5mm to 10mm (exhaust valve lift is also increased, by 0.85mm to 8.8mm).

Inlet valve diameter is up 2mm to 38mm; 2-way valve seat machining smooths gas flow. The downdraught intake now provides a direct, straight shot to the inlet ports and flow efficiency is improved 19% on the way in. Equally, flow out is 10% more efficient through the twin exhausts, which themselves have been redesigned with gradual radius bends. The twin mufflers are 78mm shorter.

Enlarge

76070_17YM_CRF450R

Honda Europe

The valve springs are oval in cross section, reducing height and allowing for more compact dimensions. A narrower valve angle of 9° intake and 10.5° exhaust (from 10°/11.5°) plus a redesigned piston boosts combustion and gives a compression ratio of 13.5:1, up from 12.5:1. A 4-hole piston oil jet (replacing the 2-hole system) reduces piston temperature and deals effectively with the heat generated by the higher compression.

Both the piston pin and finger rocker arms receive DLC coating (Diamond-like Carbon), which has excellent abrasive resistance and durability, while also reducing frictional losses. Bore and stroke remains 96mm x 62.1mm.

The engine now uses a scavenge pump to distribute the oil by force (rather than spray) for both transmission and clutch, reducing friction, improving lubrication efficiency and greatly reducing pumping losses. Only one source of oil is employed rather than two; this means a reduction in volume from 1390cc (combined engine and transmission oil) used by the outgoing design, to 1250cc total capacity.

Light weight and compact size have been achieved with several new approaches. Positioning the balancer weight inside the crank-case reduces the distance between crank and balancer. The primary drive gear and balancer drive gear are a common part, as are the primary driven gear and oil pump drive gear.

Primary gear rotation speed is 30% faster, putting less stress on both gearbox and clutch. To make best use of the extra power and torque all five gear ratios have been adjusted, with final drive handled by 13- and 49-tooth sprockets (as opposed to 13/48).

Enlarge

76067_17YM_CRF450R-2

Honda Europe

The clutch now spins 7 friction disks rather than 8 with no loss of durability; this saves space (it’s 2.6mm slimmer, at 77mm), weight and running costs and the 6 clutch plates feature a special surface friction material. A 2mm clutch plate (thicker by 0.4mm) dissipates heat more efficiently, while the judder springs remain to generate a good, consistent connection to the clutch.

The rider controls and displays are now rationalised together and sited on the left handlebar: engine stop button, EFI warning, plus EMSB mode button and LED indicator.

And Honda’s EMSB (Engine Mode Select Button) is the key that puts instant engine character adaptability at the rider’s command. With the machine stopped, and engine at idle, a simple press and hold of the button for just under a second selects the next map in sequence.

The LED built into the button signals the map in use with a quick press and number of subsequent flashes (1 flash for Mode 1, etc). If a new map is selected the choice is also confirmed to the rider.

Enlarge

76078_17YM_CRF450R

Honda Europe

Mode 1 uses the standard combination of ignition and fuelling maps to present a balanced power and torque delivery. Mode 2 is more mellow in nature, giving easy-to-manage throttle feel. Mode 3 hits sharply, with aggressive and responsive power. Mode 2 and 3 can be further tailored via the existing HRC setting tool for mapping hardware and software.

For the first time, an electric starter is now available as an optional accessory for the CRF450R.

Chassis

The completely redesigned chassis gives the rider absolute control of the CRF450R’s new power-up engine. The goals for this seventh generation of CRF aluminium beam frame were clear: to improve turning performance, front-end stability and traction, plus rear wheel drive with elevated levels of rider feedback and predictability.

The major visual change is in the dual main spars, which are now tapered, giving greater front end stability, traction and feel. Torsional stiffness is 6.8% less – with the same lateral stiffness – to improve turning ability and feel. 270g has been shaved. Now an extruded (rather than forged) part, the rear subframe also saves 225g.

Enlarge

76066_17YM_CRF450R

Honda Europe

There are many less obvious changes to the geometry and dynamic parameters of the frame’s performance. Centre of gravity is 2.7mm lower. Wheelbase is 11mm shorter, at 1482mm. Distance between the front wheel axle and swingarm pivot is increased (up 13mm at 913mm), with distance from swingarm pivot to rear axle reduced (24mm shorter at 569mm). This new geometry transfers more weight to the rear wheel for outstanding traction – a key target for the development.

The 2017 CRF450R is a slimmer, more compact machine that’s even easier to manage thanks to the lower centre of gravity. The new geometry loads the rear tyre harder to dig for drive, matching the front end’s enhanced grip level and feel for traction at the limit.

The new CRF450R now wears a fully adjustable 49mm Showa USD coil spring fork, a version of the Showa ‘factory’ fork supplied to MX race teams in the Japanese championship. It is not an evolution of the 48mm item last fitted to the 14YM, with which it differs in every dimension: the cylinder has a 25mm diameter as opposed to 24mm, the rod 14mm (12.5mm) with the compression piston 39mm (37mm). As you’d expect from what is effectively race-spec suspension, out of the crate the fork action is supple, smooth and fully in control.

The fully adjustable Showa rear shock’s top mount is 39mm lower and the shock itself is mounted on the centerline of the machine (it was 5mm offset before), improving mass centralisation and high-speed stability. At 599mm in length the aluminium swingarm is 18mm shorter, with thinner shaping (in cross section) for the arms. It’s 220g lighter.

Enlarge

76074_17YM_CRF450R

Honda Europe

A 260mm wave-pattern disc delivers effective heat dissipation, power and feel from the two-piston brake caliper working it; a matching 240mm wave-pattern disc and single-piston caliper is at the rear. Lightweight aluminium rims, with directly attached spoke pattern layout reduce unsprung weight; the front is a 21 x 1.6in, the rear an 19 x 2.15in. Fitted as standard equipment are Dunlop’s MX3SF and MX3S soft terrain tyres.

The new CRF450R now uses a 6.3L titanium fuel tank, which weighs 513g less than the plastic design it replaces. The loss of half a kilo high on the machine contributes significantly to the lower centre of gravity. The smooth external lines of the new plastics help the rider move easily, and the frontal area is also narrower – the width of the radiator/tank shrouds has been reduced by 30mm while a redesigned front mudguard directs a more efficient funnel of air to the radiator. The bodywork also uses durable film inset graphics that cover a wide area with scratch-resistant style.

Words: Press Release | Image: Honda Europe

Pro Motocross

The MX Vice SMX Review Show Episode #22 – Lars Lindstrom

HRC Boss talks about their amazing 2023 season

Published

on

In 2023, MX Vice is running a regular SMX Review show, where we talk all things AMA, frequently with a star guest or pundit. This time Ben & Brad are joined by Honda HRC USA Team Manager Lars Lindstrom, talking about the red team’s amazing 2023 season, his time as Chad Reed’s mechanic, and his riders’ plans for the Motocross of Nations!


Images: HRC Honda


Lars (crouching with his arm on the front fender) has enjoyed a great year with his team in 2023

Massive thanks to Lars for joining us and we wish you and your team all the best for the rest of the year!

This podcast was recorded prior to the Washougal National, so apologies for the delay and for the few sound issues.  None of these were caused by Lars or his systems. Enjoy the podcast!



Continue Reading

Uncategorized

Live Results – AMA Pro Motocross Round 6 – Southwick

Practice Times & Race Results from The Wick

Published

on

The action is underway at Southwick for round six of the AMA Pro Motocross series. Will Jett Lawrence dominate again, and how will Hunter fare after his issues at RedBud?

Featured Image: HRC Honda

This page will have all of the results from The Wick. The results are posted in an easy-to-view fashion, with the latest results at the very top of the page. If you do not immediately see the most recent results, hit the refresh button in the top-right corner and then the issue should be rectified.

450 Updated Championship Classification

450 Overall Results

450 Moto Two

250 Updated Championship Classification

250 Overall Results

They said the sand might suit him! Tom Vialle takes his first overall win in the USA, and the 250 wildness continues through the pack as the red plate changes hands for the first time in either class this summer!

250 Moto 2

450 Moto 1

250 Moto 1

450 Consolation Race

Just for British fans, SC Sporthomes Husqvarna rider Charlie Putnam finished 19th in the Consolation Race after not making the cut in Qualifying.

250 Combined Qualifying Times


450 Combined Qualifying Times



Continue Reading

British Championship

Michelin MX Nationals – Race Report, Rnd 2 – Monster Mountain

Full report from packed event in South Wales

Published

on

Last weekend the new Monster Mountain facility staged its first event, round two of the Michelin MX Nationals powered by Milwaukee, and what an action-packed weekend it was! With almost 300 hundred riders keen to get on the new track and a tremendous crowd for the MX Nationals, both enjoyed the two days of fast and hot motocross action.

Words: Dick Law for Michelin MX Nationals | Featured Image: Michelin MX Nationals

If you haven’t seen the images and videos on social media, Monster Mountain is a USA- styled track set on top of a Welsh mountain. With months and months of hard, back-breaking work that involved moving hundreds of tons of earth with machines the size of a small house, the Monster Mountain track was born, and the scale of the project was mind-blowing. Once you have climbed up the mountain’s side to the peak, you enter a landscape that could be easily mistaken for Pala or even the moon.

The Leatt Pro MX1s were mainly about three riders, the Crendon Fastrack Honda pairing of Conrad Mewse and Josh Gilbert and Cab Screens Crescent Yamaha rider Harri Kullas. The winner would come from one of these riders, who have dominated the home racing scene all year.

Kullas got the holeshot at the start of the first combined MX1 and MX2 pro race but was quickly passed a quarter of the way around the opening lap by Mewse and then his teammate Gilbert, who had gated third, slipped by Kullas before the end of the lap. While this happened, John Adamson (ASA United GasGas) got cross threaded in one of the deep ruts and dropped from fourth to tenth.

Adamson’s teammate Ivo Monticelli, who was making a comeback from an injury he suffered at round one of the Revo series, took full advantage of his teammate Adamson’s problems and took over his fourth place as Jason Meara (JM 10 Moto-cycle Racing Honda), Tom Grimshaw (Chambers Racing), Charlie Putnam (SC Sporthomes Husqvarna), Jamie Carpenter (Cab Screens Crescent Yamaha), and Dan Thornhill (Chambers Racing) all moved up a place at Adamson’s expense.

The leading four riders of Mewse, Gilbert, Kullas, and Monticelli stayed in the same running order to the end of the race as Meara and Grimshaw fought over fifth place. The two riders changed position many times till, on lap eight, Meara suffered a mechanical failure, leaving Grimshaw to make fifth all his own.

Adamson was on a charge after his crash and fought back to sixth at the end of the race, while Putnam came off his machine, relegating himself back to thirtieth place.

The immense new track, with its long start straights and big jumps, and even an adverse camber turn, was always going to disadvantage the smaller Apico MX2 machines over the power of the Leatt MX1 machines, with Glen McCormick (Chambers Racing) being the first of the MX2s around turn one, followed by Jamie Wainwright (WPH/SBE/Redline KTM) and Carlton Husband (Phoenix EvenStrokes Kawasaki) as race favourite Charlie Cole (Blades Bikes Kawasaki) suffering a mechanical problem that saw him at the back of the pack with a lot of work to do.

Wainwright had passed McCormick to lead the MX2s by the end of the first lap as Husband slipped back three places. But, as the race continued, Husband upped his pace and repassed six other riders on his way to tenth in the race, but first MX2 home.

McCormick put on a last-lap charge and snatched a place from the hands of Wainwright as the pair finished eleventh and thirteenth on the track but second and third in the MX2s, as for the unlucky Cole. He regrouped and fought his way back from thirtieth to finish fifteenth in the race but fourth MX2 and the last person on the lead lap.

Kullas once again got the holeshot at the start of race two, and once again, Gilbert found a way past him by the end of the lap. Behind them, it was Grimshaw, Meara, Monticelli, Mewse and Carpenter.

Grimshaw took his time in the opening laps and slipped back to sixth. Mewse slid past Monticelli on the second lap to take over third place, with Meara relegated to fifth.

While Grimshaw and Carpenter fought over sixth place, the running order of Gilbert from Kullas, Mewse, Monticelli, and Meara stayed the same till the very last lap when Mewse used the backmarkers to snatch second place from Kullas, and with it second overall for the meeting. (MX Vice was witness to the incident that cost Kullas second place, where two MX2 riders fell in a rut that Harri had already committed to, leaving the Yamaha man to haul his bike out of the massively deep inside rut as Conrad tiptoed around the outside of them, probably laughing his head off!).

On the Apico MX2 side of race two, Cole had gated tenth but had Wainwright in his wheel tracks and McCormick two places further back as they battled for the MX2 lead amongst the bigger MX1 machines.

Wainwright & Cole battle for MX2 supremacy in race two. Cole won the event, but Wainwright leads the series!

After changing the lead with Wainwright several times, Cole established himself eighth on the track but first of the MX2s. Wainwright finished in tenth place for the second MX2, with McCormick third. Unfortunately, Husband didn’t get the start he wanted and didn’t seem to get going as he finished sixth MX2, behind Joe Brooks and Charlie Heyman (Tru7 Honda).           

With three race wins and a second place, Ben Edwards won the RFX expert MX1s from race one winner and wildcard rider Josh Waterman. Jayden Ashwell (AJP Geartec Husqvarna) was third, with Jay McCrum missing a podium position.

Ashley Greedy (Darjen Contractors Gas Gas) won his first three races in the RFX MX2s, but while in the lead of his fourth and final race of the weekend, he was passed by Jimmy Margetson (AJP Geartec Husqvarna) on his way to second overall, with Mathew Bayliss (Darjen Contractors Gas Gas).

Ash Greedy had a great weekend on home territory.

Wildcard rider Scott Elderfield won three out of his four races on his way to the Motoverde amateur MX1 overall, with race four winner Sean Wainwright (Fasteddy Racing Honda) second. Josh Greedy (Darjen Contractors Kawasaki) tied in third with Luke Mellows (Forty-Four Honda).

Wildcard riders took three out of the top four places in the Motoverde amateur MX2 class as Ben Clarke, with two wins and two third places, took the overall from race two winner Raife Broadley (723 Race Bikes Gas Gas) while the winner of the last race Wal Beaney was third, just five points behind the winner.

Tallon Aspden (LA Groundwork KTM), with three wins and a second place, won the Worx clubman MX1s from Darren Manning-Coe, who was second in all four of his races as Daniel Chapman, the winner of the last race of the weekend was third as Drew Lane just missed out on the podium by two points.

Sam Ongley (Fantic) won all four Spiral GFX clubman MX2 races from Matt Tolly and Charlie West.

In the youth Fly Futures MXY2s, Billy Askew (GTCi Revo Kawasaki) won all four races and remains unbeaten this year. Behind him, Domonic Newbury (426 Motorsport KTM) and Mackenzie Marshall (DK Offroad KTM) were separated by just three points as they finished the weekend in second and third overall.

Billy Askew (441) already has his nose in front of Domonic Newbury (404), Mackenzie Marshall (555) and Jak Taylor (22, WM Tatchell Husqvarna).

Reece Jones (SJP Moto Husqvarna) was third in his first race of the weekend, but from then on won the other three for first overall in the Fly MXY125s. Jake Walker (Mr T Racing KTM), who didn’t finish out of the top four all weekend, was second, with a race-three low score pushing Tyla Hooley (Fantic) down to third.

Josh Vail (SJP Moto Husqvarna), with two race wins, a second and a third place, took the overall win in the Syntol Big Wheel 85s with Jamie Keith (MBR X&P KTM), who didn’t finish out of the top three all weekend, second and Charlie Richmond third.

Josh Vail took the overall win in the Syntol Supermini Big Wheel class

With a couple of wins and two-second places, Joel Winstanley-Dawson (Techsource Racing KTM) won the Syntol small wheel 85s from race one winner Lucas Lee (Husqvarna) and Ollie Truman.

Top ten results

Leatt Pro MX1:

1 Josh Gilbert (Crendon Fastrack Honda) 22 + 25 = 47

2 Conrad Mewse (Crendon Fastrack Honda) 25 + 22 = 47

3 Harri Kullas (Cab Screens Crescent Yamaha) 20 + 20 = 40

4 Ivo Monticelli (ASA United Gas Gas) 18 + 18 = 36

5 Tom Grimshaw (Chambers Racing) 16 + 15 = 31

6 James Carpenter (Cab Screens Crescent Yamaha) 14 + 14 = 28

7 John Adamson (ASA United Gas Gas) 15 + 13 = 28

8 Dan Thornhill (Chambers Racing) 13 + 10 = 23

9 Callum Green (Tru7 Honda Academy Honda) 10 + 11 = 21

10 Stuart Edmonds (S Biggs Commercials Honda) 12 + 9 = 21

Apico Pro MX2:

1 Charlie Cole (Blades Bikes Kawasaki) 18 + 25 = 43

2 Jamie Wainwright (WPH/SBE/Redline KTM) 20 + 22 = 42

3 Glen McCormick (Chambers Racing) 22 + 20 = 42

4 Carlton Husband (Phoenix EvenStrokes Kawasaki) 25 + 15 = 40

5 Charlie Hayman (Tru7 Honda Academy Honda) 16 + 16 = 32

6 Joe Brooks (GRT Impact KTM) 13 + 18 = 31

7 Calum Mitchell (Lexa MX Husqvarna) 15 + 14 = 29

8 Bailey Johnston (Verde Shiloh KTM) 11 + 13 = 24

9 Ben Franklin (Chambers Husqvarna) 12 + 12 = 24

10 Lewis Hall (Fantic) 14 + 10 = 24

RFX Expert MX1:

1 Ben Edwards (KTM) 22 + 25 + 25 + 25 = 97

2 Josh Waterman (KTM) 25 + 22 + 22 + 20 = 89

3 Jayden Ashwell (AJP Geartec Husqvarna) 18 + 20 + 20 + 16 = 74

4 Jay McCrum (Honda) 15 + 15 + 15 + 18 = 63

5 Richard Bird (Allmoto Megabikes Yamaha) 16 + 16 + 16 + 14 = 62

6 Corrie Southwood (Langmead Kawasaki) 5 + 14 + 12 = 22 = 53

7 Ryan Thomson (Drysdale MC Gas Gas) 14 + 13 + 13 + 7 = 47

8 Josh Canton (Concept CCF KTM) 13 + 9 + 11 + 13 = 46

9 Josh Peters (Jim Aim KTM) 20 + 0 + 18 + 0 = 38

10 Aaron Patstone (Gas Gas) 9 + 8 + 10 + 10 = 37

RFX Expert MX2:

1 Ashley Greedy (Darjen Contractors Gas Gas) 25 + 25 + 25 + 22 = 97

2 Jimmy Margetson (Husqvarna) 15 + 20 + 15 + 25 = 75

3 Mathew Bayliss (Darjen Contractors Gas Gas) 20 + 22 + 14 + 13 = 69

4 Uldis Freibergs (Lexa MX Husqvarna) 16 + 15 + 16 + 20 = 67

5 Kieran Banks (Yamaha) 18 + 13 + 18 + 18 = 67

6 Henry Siddiqui (Husqvarna) 13 + 14 + 20 + 16 = 63

7 Josh Colman (Holeshot MX KTM) 22 + 16 + 22 + 0 = 60

8 Aaron Ongley (723 Racebikes Gas Gas) 10 + 12 + 9 + 14 = 45

9 Niall Cregan (CCM Motorcycles Husqvarna) 5 + 9 + 11 + 15 = 40

10 Callum Murfitt (Southside MMX KTM) 7 + 11 + 10 + 12 = 40

Motoverde amateur MX1:

1 Scott Elderfield (Kawasaki) 25 + 25 + 25 + 22 = 97

2 Sean Wainwright (Fasteddy Racing Honda) 20 + 18 + 20 + 25 = 83

3 Josh Greedy (Darjen Contractors Kawasaki) 22 + 20 + 18 + 20 = 80

4 Luke Mellows (Forty Four Honda) 18 + 22 + 22 + 18 = 80

5 Jamie Dixon (P&S Yamaha) 14 + 16 + 12 + 16 = 58

6 Joshua McCorkell (McCorkell Racing Husqvarna) 16 + 13 + 11 + 14 = 54

7 Ryan Osborn (Evotech KTM) 11 + 14 + 15 + 13 = 53

8 Callum Gordon (MX Revive Gas Gas) 12 + 15 + 13 + 10 = 50

9 Brad Thornhill (LMC Plant KTM) 9 + 12 + 14 + 12 = 47

10 Jacob Bowden (VMX Motocross Club KTM) 10 + 11 + 10 + 15 = 46

Motoverde amateur MX2:

1 Ben Clark (Gas Gas) 25 + 20 + 25 + 20 = 90

2 Raife Broadley (723 Race Bikes Gas Gas) 18 + 25 + 22 + 22 = 87

3 Wal Beaney (KTM) 22 + 18 + 20 + 25 = 85

4 Jayden Murphy (KTM) 16 + 22 + 16 + 18 = 72

5 Shaun Springer (Gas Gas) 20 + 16 + 18 + 16 = 70

6 Charlie Palmer (Apex Gas Gas) 14 + 15 + 13 + 15 = 57

7 Dan Brough (Rutzz Yamaha) 12 + 12 + 7 + 14 = 45

8 Alex Buchanan (Mace Tech Tuning KTM) 11 + 14 + 12 + 8 = 45

9 Jonathan Rodrick-Evans (KTM) 7 + 7 + 14 + 12 = 40

10 Leon Ongley (Fantic) 15 + 8 + 6 + 11 = 40

Worx Sports Insurance Clubman MX1:

1 Tallon Aspden (LA Groundwork KTM) 25 + 25 + 25 + 20 = 95

2 Darren Manning-Coe (Fabrican KTM) 22 + 22 + 22 + 22 = 88

3 Daniel Chapman (KTM) 15 + 18 + 18 + 25 = 76

4 Drew Lane (Lanes Construction Gas Gas) 20 + 20 + 16 + 18 = 74

5 Kalem Hicks (British Army MX Team Husqvarna) 16 + 16 + 15 + 15 = 62

6 Billy Saunders (WMS Commercials Honda) 18 + 0 + 20 + 16 = 54

7 Ryan Davis (KTM) 10 + 12 + 14 + 12 = 48

8 Ashley Senior (Honda) 11 + 14 + 9 + 13 = 47

9 Josh Young (KTM) 14 + 10 + 11 + 11 = 46

10 Josh Bailey (Chris Bailey Landscaping KTM) 6 + 7 + 10 + 14 = 37

Spiral Clubman MX2:

1 Sam Ongley (Fantic) 25 + 25 + 25 + 25 = 100

2 Matt Tolley (426 Motorsport KTM) 20 + 22 + 22 + 16 = 80

3 Charlie West (Tim Feeney KTM) 11 + 16 + 16 + 22 = 65

4 Bradley Johnstone (Moto Connection Kawasaki) 16 + 15 + 20 + 9 = 60

5 Chris Corthorn (Kawasaki) 10 + 20 + 9 + 20 = 59

6 George Boyce (Design Scaffolding KTM) 12 + 13 + 13 + 18 = 56

7 Matthew Pocock (MGP Steel Erection KTM) 0 + 18 + 18 + 15 = 51

8 Richy Roberts (Rutzz Racing Yamaha) 9 + 6 + 15 + 14 = 44

9 Max Flint (Planet Moto KTM) 14 + 9 + 15 + 14 = 44

10 Jordan Ambler (City Wide KTM) 18 + 12 + 0 + 11 = 44

Fly Racing MXY125:

1 Billy Askew (GTCi Revo Kawasaki) 25 + 25 + 25 + 25 = 100

2 Domonic Newbury (426 Motorsport KTM) 20 + 15 + 20 + 20 = 75

3 Mckenzie Marshall (DK Offroad KTM) 22 + 10 + 22 + 18 = 72

4 George Hopkins (HJA Motorcycles Gas Gas) 18 + 14 + 16 + 14 = 62

5 Jak Taylor (Lexa MX Husqvarna) 9 + 20 + 10 + 22 = 61

6 Fin Wilson (Husqvarna) 16 + 16 + 14 + 15 = 61

7 Bayliss Utting (Trell Contractors Honda) 14 + 22 + 18 + 4 = 58

8 Liam Bennett (Apico GMR Husqvarna) 4 + 18 + 15 + 16 = 53

9 Kayde Rayns (Scott Motorsport Yamaha) 15 + 13 + 12 + 12 = 52

10 Kyron Carron (LC Construction KTM) 12 + 8 + 11 + 13 = 44

Fly Racing MXY125:

1 Reece Jones (SJP Moto KTM) 20 + 25 + 25 + 25 = 95

2 Jake Walker (Mr T Racing KTM) 18 + 20 + 22 + 22 = 82

3 Tyla Hooley (Fantic) 22 + 22 + 10 + 20 = 74

4 Freddie Gardiner (Matt Gardiner MX KTM) 25 + 11 + 12 + 18 = 66

5 Wesley McGavin (KTM) 13 + 18 + 18 + 16 = 65

6 Harrison Greenough (Simpson KTM) 14 + 16 + 16 + 12 = 58

7 Chester Hyde (Matt Pope MC Gas Gas) 15 + 15 + 13 + 13 = 56

8 Shane Jones (KTM) 16 + 14 + 14 + 10 = 54

9 Ollie Bubb (3 Flo Yamaha) 11 + 13 + 15 + 14 = 53

10 Jack Meara (Honda) 0 + 12 + 20 + 15 = 47

Syntol Big Wheel 85:

1 Josh Vail (SJP Moto KTM) 25 + 22 + 20 + 25 = 92

2 Jamie Keith (MBR X&P KTM) 20 + 25 + 22 + 22 = 89

3 Charlie Richmond (KTM) 22 + 20 + 25 + 20 = 87

4 Lewis Spratt (KTM) 16 + 18 + 15 + 16 = 65

5 Alfie Geddes-Green (Matt Pope MC Gas Gas) 18 + 8 + 18 + 18 = 62

6 Harry Lee (GRT Impact KTM) 14 + 16 + 13 + 15 = 58

7 Blake Ward-Clarke (GRT Impact KTM) 13 + 14 + 16 + 14 = 57

8 Reegan Rogers (Husqvarna) 8 + 13 + 10 + 13 = 44

9 Finlay Pickering (Mr T’s Racing KTM) 12 + 5 + 14 + 11 = 42

10 Maison Jones (Paul Green Tyres KTM) 9 + 11 + 9 + 12 = 41

Syntol Small Wheel 85:

1 Joel Winstanley-Dawson (Techsource Racing KTM) 22 + 22 + 25 + 25 = 94

2 Lucas Lee (Husqvarna) 25 + 15 + 22 + 22 = 84

3 Ollie Truman (KTM) 16 + 20 + 18 + 18 = 72

4 Archie Butterfield (KTM) 18 + 16 + 20 + 16 = 70

5 Charlie Ward (KTM) 15 + 14 + 16 + 15 = 60

6 Author Moore (3 Flo Yamaha) 20 + 18 + 0 + 0 = 58

7 Tyler Cooper (KTM) 0 + 0 + 15 + 13 = 28

8 Chad Prince (SC Sporthomes Husqvarna) 0 + 13 + 0 + 14 = 27

9 Olly Waters (Matt Gardner MX KTM) 0 + 25 + 0 + 0 = 25



Continue Reading

Latest