Connect with us
       

Uncategorized

Yamaha unveil 2017 line

All information on next year’s Yamaha range!

Published

on

Off road racing and Yamaha have been – and always will be – inseparable. Yamaha factory riders underlined the technical supremacy of the company’s ‘reverse head’ YZ-F models in 2015 by winning the MXGP World Championship, as well as the prestigious MXGP Manufacturer’s Championship.

Innovative Forward Thinking philosophy has made Yamaha one of the most dynamic and successful brands in the off road world and for 2017, the comprehensive range off motocross and enduro models bring factory performance within the reach of every off road rider.

For the 2017 season, Yamaha Motor is proud to introduce the new off road competition line-up with the higher performance 2017 YZ250F and detail changes to the other YZ-F, YZ and WR-F models.

2017 YZ250F

Fine-tuning the YZ’s winning DNA

Featuring an innovative reverse cylinder head engine, the groundbreaking Yamaha YZ250F has demonstrated it has got what it takes to outperform the toughest opposition. This game-changing motocross bike powered Jeremy Martin to consecutive AMA 250 Motocross Championships in 2014 and 2015, while YZ250F rider Cooper Webb has also taken consecutive AMA 250SX West titles in 2015 and 2016.

2017 YZ250F: Stronger, quicker, smoother

For the 2017 model year the YZ250F benefits from a range of important technical changes – such as an all-new reverse cylinder head – that are aimed at delivering increased performance and enhanced rideability.

2017 YZ250F improvements

  • Increased pulling power in the mid to high rpm range
  • Improved acceleration
  • Slicker gear shifting and smoother clutch feeling
  • Refined handling and suspension giving enhanced stability and control
  • Improved braking performance

YZ250F ENGINE

With major enhancements to the intake and exhaust efficiency, together with a slicker shifting transmission and remapped ECU, the 2017-specification engine delivers a significant increase in race-winning performance.

All-new higher performance cylinder head

With its front facing inlet and rear exiting exhaust, the YZ250F’s innovative reverse cylinder head offers many advantages over a conventional design. These include increased intake and exhaust efficiency, as well as enhanced mass centralisation thanks to the use of a top-mounted air filter and underseat fuel tank. For the 2017 model year Yamaha’s engineers have taken this cutting-edge technology to the next level and developed a new reverse cylinder head that gives the YZ250F rider even stronger mid to high rpm pulling power.

Raised intake port and high lift camshafts

For an increased flow of fresh air into the 4-valve head, the intake port’s position is raised and the intake valve diameter is increased. New higher lift intake and exhaust camshafts give increased valve lift for a stronger feeling in the mid to high rpm range – while for enhanced low to mid-range performance the intake camshaft’s working angle has been narrowed.

Stronger valve springs and new con rod

Stronger intake and exhaust valve springs are fitted to correspond with the use of new higher lift camshafts – and to accommodate the increased engine performance, a newly designed nickel-chromium-molybdenum steel con rod is used for the 2017 model.

Shorter intake funnel and new throttle joint

Further significant power increases in the mid to high-rpm range have been achieved by shortening the intake funnel to achieve reduced pumping losses – and the use of a larger throttle joint between the injector and intake port gives an increased cross-sectional area of around 5% – while its new internal design promotes better fuel vaporisation.

Redesigned exhaust port and new big bore front pipe

To achieve an optimal intake/exhaust balance, the twin exhaust ports have been redesigned and the snaking exhaust header pipe is equipped with a new larger diameter front section. As well as featuring a bigger bore pipe, this front section also benefits from larger radius bends, giving a greater internal cross sectional area that creates a much stronger exhaust pulse effect.

New remapped ECU

To match the increased engine performance produced by the redesigned cylinder head and high efficiency intake and exhaust systems, the 2017 YZ250F is equipped with a newly developed ECU with revised ignition timing and fuel injector mapping. The new ECU cuts in at higher rpm and features a rev limiter that gives an improved over-rev feeling.

Yamaha Power Tuner

Riders of all abilities can also use the optional Yamaha Power Tuner to adjust the YZ250F’s power characteristics. This compact device plugs straight into the bike without the need for a PC and enables the rider or mechanic to fine-tune the engine performance in seconds to suit the track conditions.

High-strength crankcases

In order to handle the uprated engine’s increased performance, the YZ250F is equipped with modified high-strength crankcases. While their exterior shape and construction is identical to the 2016 model, the aluminium die-cast cases on the 2017 model have been subjected to a heat treatment process that increases strength by around 5% for a high level of reliability and durability.

Smoother shifting transmission

To match the higher-powered engine’s increased driving force, the 2017 YZ250F is equipped with a new transmission featuring wider teeth on the 2nd and 3rd drive gears.

The shape of the dogs on 1st, 3rd and 5th gears has also been modified and these changes – together with a redesigned shift cam and modifications to the clutch push lever and axle design – give smoother and quicker gear shifting. Finally, a more rigid gear shift lever gives a more positive shift feeling.

YZ250F Main Engine Changes

– New high efficiency cylinder head
– Revised intake and exhaust port shape
– Larger intake valves
– Higher lift intake and exhaust camshafts
– New valve spring design
– Newly designed con rod
– Revised throttle joint
– Modified air cleaner joint design
– New big bore front exhaust
– New ECU with revised map and rev limiter settings
– High strength crankcases
– Redesigned clutch push lever
– Reshaped shift cam
– Newly designed shift pedal

YZ250F CHASSIS

Made possible by the use of the reverse head engine, the YZ250F’s top-mounted airbox and underseat fuel tank help to centralise mass for agile and responsive handling. The chassis changes introduced for 2017 include a revised balance of frame rigidity, together with a lower centre of gravity and refined suspension.

Fine-tuned aluminium beam frame

Using feedback from our factory teams, Yamaha have been able to fine-tune the frame in order to ensure that YZ250F riders are able to fully exploit the increased engine performance of the uprated 2017 model. Compared to the 2016 design, the 2017 frame is around 12mm wider in the area behind the swing-arm pivot point and this increased torsional rigidity ensures a higher degree of handling stability.

Steel engine mounting brackets

The YZ250F features specially designed front and upper engine mounting brackets that have been developed to complement the characteristics of the free-revving 250cc engine. By using 8mm thick steel for the two front brackets, with 6mm thick steel used for the upper brackets, the YZ250F’s new frame delivers a better overall rigidity balance for improved handling performance and rideability.

Repositioned footrests

To achieve a roomier riding position that best suits a wide range of racers, the footrest position on the 2017 YZ250F has been lowered by 5mm. This also helps to lower the centre of gravity to give increased control in ruts and corners.

Optimized suspension settings

Increased rideability and comfort have been achieved on the 2017 YZ250F through a number of revisions to the front and rear suspension. The class-leading Air Oil Separate (AOS) KYB® front forks feature a new more rigid outer tube design and slightly reduced oil capacity and these changes – together with new factory suspension settings – give improved rider feedback for improved chassis performance and stability in ruts, bumps and corners.

New material rear disc

For improved brake feel, the 245mm rear disc is manufactured using the same heat resistant steel as the 270mm front disc, giving total braking confidence on the fastest tracks.

New graphics

Keeping the cool black rims, the 2017 model features new graphics on the shrouds and fenders, giving a professional factory look

YZ250F Main Chassis Changes

– Refined aluminium bilateral beam frame
– Newly designed high-rigidity fork outer tubes
– Revised suspension settings
– Repositioned footrests
– New rear disc material
– New shroud and fender graphics

2017 YZ450F

With its MXGP World Championship winning performance, the Yamaha YZ450F is recognised as one of the leading 450cc motocross models. Featuring Yamaha’s technologically advanced reverse cylinder head design, this revolutionary dirt bike gives every rider the chance to experience factory bike performance.

For 2017 the YZ450F features new graphics on the shrouds and fenders and the 245mm rear disc is manufactured from the same heat resistant steel as the 270mm front disc, giving improved braking feel and performance.

2017 YZ250/YZ125/YZ85 2-strokes

With their lightweight handling and instant hit of power, the YZ250 and YZ125 2-strokes underline Yamaha’s total commitment to all dirt bike riders. Loved by 2-stroke fans for their ease of maintenance and unique character, these thoroughbreds come equipped with a larger 270mm front disc brake and feature new graphics on the shrouds and fenders for 2017.

Along with its bigger brothers, the YZ85 is one of the best-loved dirt bikes ever built, and many of today’s champions began their careers with this legendary Yamaha. For 2017 the YZ85 is equipped with new graphics.

Pro Motocross

The MX Vice SMX Review Show Episode #22 – Lars Lindstrom

HRC Boss talks about their amazing 2023 season

Published

on

In 2023, MX Vice is running a regular SMX Review show, where we talk all things AMA, frequently with a star guest or pundit. This time Ben & Brad are joined by Honda HRC USA Team Manager Lars Lindstrom, talking about the red team’s amazing 2023 season, his time as Chad Reed’s mechanic, and his riders’ plans for the Motocross of Nations!


Images: HRC Honda


Lars (crouching with his arm on the front fender) has enjoyed a great year with his team in 2023

Massive thanks to Lars for joining us and we wish you and your team all the best for the rest of the year!

This podcast was recorded prior to the Washougal National, so apologies for the delay and for the few sound issues.  None of these were caused by Lars or his systems. Enjoy the podcast!



Continue Reading

Uncategorized

Live Results – AMA Pro Motocross Round 6 – Southwick

Practice Times & Race Results from The Wick

Published

on

The action is underway at Southwick for round six of the AMA Pro Motocross series. Will Jett Lawrence dominate again, and how will Hunter fare after his issues at RedBud?

Featured Image: HRC Honda

This page will have all of the results from The Wick. The results are posted in an easy-to-view fashion, with the latest results at the very top of the page. If you do not immediately see the most recent results, hit the refresh button in the top-right corner and then the issue should be rectified.

450 Updated Championship Classification

450 Overall Results

450 Moto Two

250 Updated Championship Classification

250 Overall Results

They said the sand might suit him! Tom Vialle takes his first overall win in the USA, and the 250 wildness continues through the pack as the red plate changes hands for the first time in either class this summer!

250 Moto 2

450 Moto 1

250 Moto 1

450 Consolation Race

Just for British fans, SC Sporthomes Husqvarna rider Charlie Putnam finished 19th in the Consolation Race after not making the cut in Qualifying.

250 Combined Qualifying Times


450 Combined Qualifying Times



Continue Reading

British Championship

Michelin MX Nationals – Race Report, Rnd 2 – Monster Mountain

Full report from packed event in South Wales

Published

on

Last weekend the new Monster Mountain facility staged its first event, round two of the Michelin MX Nationals powered by Milwaukee, and what an action-packed weekend it was! With almost 300 hundred riders keen to get on the new track and a tremendous crowd for the MX Nationals, both enjoyed the two days of fast and hot motocross action.

Words: Dick Law for Michelin MX Nationals | Featured Image: Michelin MX Nationals

If you haven’t seen the images and videos on social media, Monster Mountain is a USA- styled track set on top of a Welsh mountain. With months and months of hard, back-breaking work that involved moving hundreds of tons of earth with machines the size of a small house, the Monster Mountain track was born, and the scale of the project was mind-blowing. Once you have climbed up the mountain’s side to the peak, you enter a landscape that could be easily mistaken for Pala or even the moon.

The Leatt Pro MX1s were mainly about three riders, the Crendon Fastrack Honda pairing of Conrad Mewse and Josh Gilbert and Cab Screens Crescent Yamaha rider Harri Kullas. The winner would come from one of these riders, who have dominated the home racing scene all year.

Kullas got the holeshot at the start of the first combined MX1 and MX2 pro race but was quickly passed a quarter of the way around the opening lap by Mewse and then his teammate Gilbert, who had gated third, slipped by Kullas before the end of the lap. While this happened, John Adamson (ASA United GasGas) got cross threaded in one of the deep ruts and dropped from fourth to tenth.

Adamson’s teammate Ivo Monticelli, who was making a comeback from an injury he suffered at round one of the Revo series, took full advantage of his teammate Adamson’s problems and took over his fourth place as Jason Meara (JM 10 Moto-cycle Racing Honda), Tom Grimshaw (Chambers Racing), Charlie Putnam (SC Sporthomes Husqvarna), Jamie Carpenter (Cab Screens Crescent Yamaha), and Dan Thornhill (Chambers Racing) all moved up a place at Adamson’s expense.

The leading four riders of Mewse, Gilbert, Kullas, and Monticelli stayed in the same running order to the end of the race as Meara and Grimshaw fought over fifth place. The two riders changed position many times till, on lap eight, Meara suffered a mechanical failure, leaving Grimshaw to make fifth all his own.

Adamson was on a charge after his crash and fought back to sixth at the end of the race, while Putnam came off his machine, relegating himself back to thirtieth place.

The immense new track, with its long start straights and big jumps, and even an adverse camber turn, was always going to disadvantage the smaller Apico MX2 machines over the power of the Leatt MX1 machines, with Glen McCormick (Chambers Racing) being the first of the MX2s around turn one, followed by Jamie Wainwright (WPH/SBE/Redline KTM) and Carlton Husband (Phoenix EvenStrokes Kawasaki) as race favourite Charlie Cole (Blades Bikes Kawasaki) suffering a mechanical problem that saw him at the back of the pack with a lot of work to do.

Wainwright had passed McCormick to lead the MX2s by the end of the first lap as Husband slipped back three places. But, as the race continued, Husband upped his pace and repassed six other riders on his way to tenth in the race, but first MX2 home.

McCormick put on a last-lap charge and snatched a place from the hands of Wainwright as the pair finished eleventh and thirteenth on the track but second and third in the MX2s, as for the unlucky Cole. He regrouped and fought his way back from thirtieth to finish fifteenth in the race but fourth MX2 and the last person on the lead lap.

Kullas once again got the holeshot at the start of race two, and once again, Gilbert found a way past him by the end of the lap. Behind them, it was Grimshaw, Meara, Monticelli, Mewse and Carpenter.

Grimshaw took his time in the opening laps and slipped back to sixth. Mewse slid past Monticelli on the second lap to take over third place, with Meara relegated to fifth.

While Grimshaw and Carpenter fought over sixth place, the running order of Gilbert from Kullas, Mewse, Monticelli, and Meara stayed the same till the very last lap when Mewse used the backmarkers to snatch second place from Kullas, and with it second overall for the meeting. (MX Vice was witness to the incident that cost Kullas second place, where two MX2 riders fell in a rut that Harri had already committed to, leaving the Yamaha man to haul his bike out of the massively deep inside rut as Conrad tiptoed around the outside of them, probably laughing his head off!).

On the Apico MX2 side of race two, Cole had gated tenth but had Wainwright in his wheel tracks and McCormick two places further back as they battled for the MX2 lead amongst the bigger MX1 machines.

Wainwright & Cole battle for MX2 supremacy in race two. Cole won the event, but Wainwright leads the series!

After changing the lead with Wainwright several times, Cole established himself eighth on the track but first of the MX2s. Wainwright finished in tenth place for the second MX2, with McCormick third. Unfortunately, Husband didn’t get the start he wanted and didn’t seem to get going as he finished sixth MX2, behind Joe Brooks and Charlie Heyman (Tru7 Honda).           

With three race wins and a second place, Ben Edwards won the RFX expert MX1s from race one winner and wildcard rider Josh Waterman. Jayden Ashwell (AJP Geartec Husqvarna) was third, with Jay McCrum missing a podium position.

Ashley Greedy (Darjen Contractors Gas Gas) won his first three races in the RFX MX2s, but while in the lead of his fourth and final race of the weekend, he was passed by Jimmy Margetson (AJP Geartec Husqvarna) on his way to second overall, with Mathew Bayliss (Darjen Contractors Gas Gas).

Ash Greedy had a great weekend on home territory.

Wildcard rider Scott Elderfield won three out of his four races on his way to the Motoverde amateur MX1 overall, with race four winner Sean Wainwright (Fasteddy Racing Honda) second. Josh Greedy (Darjen Contractors Kawasaki) tied in third with Luke Mellows (Forty-Four Honda).

Wildcard riders took three out of the top four places in the Motoverde amateur MX2 class as Ben Clarke, with two wins and two third places, took the overall from race two winner Raife Broadley (723 Race Bikes Gas Gas) while the winner of the last race Wal Beaney was third, just five points behind the winner.

Tallon Aspden (LA Groundwork KTM), with three wins and a second place, won the Worx clubman MX1s from Darren Manning-Coe, who was second in all four of his races as Daniel Chapman, the winner of the last race of the weekend was third as Drew Lane just missed out on the podium by two points.

Sam Ongley (Fantic) won all four Spiral GFX clubman MX2 races from Matt Tolly and Charlie West.

In the youth Fly Futures MXY2s, Billy Askew (GTCi Revo Kawasaki) won all four races and remains unbeaten this year. Behind him, Domonic Newbury (426 Motorsport KTM) and Mackenzie Marshall (DK Offroad KTM) were separated by just three points as they finished the weekend in second and third overall.

Billy Askew (441) already has his nose in front of Domonic Newbury (404), Mackenzie Marshall (555) and Jak Taylor (22, WM Tatchell Husqvarna).

Reece Jones (SJP Moto Husqvarna) was third in his first race of the weekend, but from then on won the other three for first overall in the Fly MXY125s. Jake Walker (Mr T Racing KTM), who didn’t finish out of the top four all weekend, was second, with a race-three low score pushing Tyla Hooley (Fantic) down to third.

Josh Vail (SJP Moto Husqvarna), with two race wins, a second and a third place, took the overall win in the Syntol Big Wheel 85s with Jamie Keith (MBR X&P KTM), who didn’t finish out of the top three all weekend, second and Charlie Richmond third.

Josh Vail took the overall win in the Syntol Supermini Big Wheel class

With a couple of wins and two-second places, Joel Winstanley-Dawson (Techsource Racing KTM) won the Syntol small wheel 85s from race one winner Lucas Lee (Husqvarna) and Ollie Truman.

Top ten results

Leatt Pro MX1:

1 Josh Gilbert (Crendon Fastrack Honda) 22 + 25 = 47

2 Conrad Mewse (Crendon Fastrack Honda) 25 + 22 = 47

3 Harri Kullas (Cab Screens Crescent Yamaha) 20 + 20 = 40

4 Ivo Monticelli (ASA United Gas Gas) 18 + 18 = 36

5 Tom Grimshaw (Chambers Racing) 16 + 15 = 31

6 James Carpenter (Cab Screens Crescent Yamaha) 14 + 14 = 28

7 John Adamson (ASA United Gas Gas) 15 + 13 = 28

8 Dan Thornhill (Chambers Racing) 13 + 10 = 23

9 Callum Green (Tru7 Honda Academy Honda) 10 + 11 = 21

10 Stuart Edmonds (S Biggs Commercials Honda) 12 + 9 = 21

Apico Pro MX2:

1 Charlie Cole (Blades Bikes Kawasaki) 18 + 25 = 43

2 Jamie Wainwright (WPH/SBE/Redline KTM) 20 + 22 = 42

3 Glen McCormick (Chambers Racing) 22 + 20 = 42

4 Carlton Husband (Phoenix EvenStrokes Kawasaki) 25 + 15 = 40

5 Charlie Hayman (Tru7 Honda Academy Honda) 16 + 16 = 32

6 Joe Brooks (GRT Impact KTM) 13 + 18 = 31

7 Calum Mitchell (Lexa MX Husqvarna) 15 + 14 = 29

8 Bailey Johnston (Verde Shiloh KTM) 11 + 13 = 24

9 Ben Franklin (Chambers Husqvarna) 12 + 12 = 24

10 Lewis Hall (Fantic) 14 + 10 = 24

RFX Expert MX1:

1 Ben Edwards (KTM) 22 + 25 + 25 + 25 = 97

2 Josh Waterman (KTM) 25 + 22 + 22 + 20 = 89

3 Jayden Ashwell (AJP Geartec Husqvarna) 18 + 20 + 20 + 16 = 74

4 Jay McCrum (Honda) 15 + 15 + 15 + 18 = 63

5 Richard Bird (Allmoto Megabikes Yamaha) 16 + 16 + 16 + 14 = 62

6 Corrie Southwood (Langmead Kawasaki) 5 + 14 + 12 = 22 = 53

7 Ryan Thomson (Drysdale MC Gas Gas) 14 + 13 + 13 + 7 = 47

8 Josh Canton (Concept CCF KTM) 13 + 9 + 11 + 13 = 46

9 Josh Peters (Jim Aim KTM) 20 + 0 + 18 + 0 = 38

10 Aaron Patstone (Gas Gas) 9 + 8 + 10 + 10 = 37

RFX Expert MX2:

1 Ashley Greedy (Darjen Contractors Gas Gas) 25 + 25 + 25 + 22 = 97

2 Jimmy Margetson (Husqvarna) 15 + 20 + 15 + 25 = 75

3 Mathew Bayliss (Darjen Contractors Gas Gas) 20 + 22 + 14 + 13 = 69

4 Uldis Freibergs (Lexa MX Husqvarna) 16 + 15 + 16 + 20 = 67

5 Kieran Banks (Yamaha) 18 + 13 + 18 + 18 = 67

6 Henry Siddiqui (Husqvarna) 13 + 14 + 20 + 16 = 63

7 Josh Colman (Holeshot MX KTM) 22 + 16 + 22 + 0 = 60

8 Aaron Ongley (723 Racebikes Gas Gas) 10 + 12 + 9 + 14 = 45

9 Niall Cregan (CCM Motorcycles Husqvarna) 5 + 9 + 11 + 15 = 40

10 Callum Murfitt (Southside MMX KTM) 7 + 11 + 10 + 12 = 40

Motoverde amateur MX1:

1 Scott Elderfield (Kawasaki) 25 + 25 + 25 + 22 = 97

2 Sean Wainwright (Fasteddy Racing Honda) 20 + 18 + 20 + 25 = 83

3 Josh Greedy (Darjen Contractors Kawasaki) 22 + 20 + 18 + 20 = 80

4 Luke Mellows (Forty Four Honda) 18 + 22 + 22 + 18 = 80

5 Jamie Dixon (P&S Yamaha) 14 + 16 + 12 + 16 = 58

6 Joshua McCorkell (McCorkell Racing Husqvarna) 16 + 13 + 11 + 14 = 54

7 Ryan Osborn (Evotech KTM) 11 + 14 + 15 + 13 = 53

8 Callum Gordon (MX Revive Gas Gas) 12 + 15 + 13 + 10 = 50

9 Brad Thornhill (LMC Plant KTM) 9 + 12 + 14 + 12 = 47

10 Jacob Bowden (VMX Motocross Club KTM) 10 + 11 + 10 + 15 = 46

Motoverde amateur MX2:

1 Ben Clark (Gas Gas) 25 + 20 + 25 + 20 = 90

2 Raife Broadley (723 Race Bikes Gas Gas) 18 + 25 + 22 + 22 = 87

3 Wal Beaney (KTM) 22 + 18 + 20 + 25 = 85

4 Jayden Murphy (KTM) 16 + 22 + 16 + 18 = 72

5 Shaun Springer (Gas Gas) 20 + 16 + 18 + 16 = 70

6 Charlie Palmer (Apex Gas Gas) 14 + 15 + 13 + 15 = 57

7 Dan Brough (Rutzz Yamaha) 12 + 12 + 7 + 14 = 45

8 Alex Buchanan (Mace Tech Tuning KTM) 11 + 14 + 12 + 8 = 45

9 Jonathan Rodrick-Evans (KTM) 7 + 7 + 14 + 12 = 40

10 Leon Ongley (Fantic) 15 + 8 + 6 + 11 = 40

Worx Sports Insurance Clubman MX1:

1 Tallon Aspden (LA Groundwork KTM) 25 + 25 + 25 + 20 = 95

2 Darren Manning-Coe (Fabrican KTM) 22 + 22 + 22 + 22 = 88

3 Daniel Chapman (KTM) 15 + 18 + 18 + 25 = 76

4 Drew Lane (Lanes Construction Gas Gas) 20 + 20 + 16 + 18 = 74

5 Kalem Hicks (British Army MX Team Husqvarna) 16 + 16 + 15 + 15 = 62

6 Billy Saunders (WMS Commercials Honda) 18 + 0 + 20 + 16 = 54

7 Ryan Davis (KTM) 10 + 12 + 14 + 12 = 48

8 Ashley Senior (Honda) 11 + 14 + 9 + 13 = 47

9 Josh Young (KTM) 14 + 10 + 11 + 11 = 46

10 Josh Bailey (Chris Bailey Landscaping KTM) 6 + 7 + 10 + 14 = 37

Spiral Clubman MX2:

1 Sam Ongley (Fantic) 25 + 25 + 25 + 25 = 100

2 Matt Tolley (426 Motorsport KTM) 20 + 22 + 22 + 16 = 80

3 Charlie West (Tim Feeney KTM) 11 + 16 + 16 + 22 = 65

4 Bradley Johnstone (Moto Connection Kawasaki) 16 + 15 + 20 + 9 = 60

5 Chris Corthorn (Kawasaki) 10 + 20 + 9 + 20 = 59

6 George Boyce (Design Scaffolding KTM) 12 + 13 + 13 + 18 = 56

7 Matthew Pocock (MGP Steel Erection KTM) 0 + 18 + 18 + 15 = 51

8 Richy Roberts (Rutzz Racing Yamaha) 9 + 6 + 15 + 14 = 44

9 Max Flint (Planet Moto KTM) 14 + 9 + 15 + 14 = 44

10 Jordan Ambler (City Wide KTM) 18 + 12 + 0 + 11 = 44

Fly Racing MXY125:

1 Billy Askew (GTCi Revo Kawasaki) 25 + 25 + 25 + 25 = 100

2 Domonic Newbury (426 Motorsport KTM) 20 + 15 + 20 + 20 = 75

3 Mckenzie Marshall (DK Offroad KTM) 22 + 10 + 22 + 18 = 72

4 George Hopkins (HJA Motorcycles Gas Gas) 18 + 14 + 16 + 14 = 62

5 Jak Taylor (Lexa MX Husqvarna) 9 + 20 + 10 + 22 = 61

6 Fin Wilson (Husqvarna) 16 + 16 + 14 + 15 = 61

7 Bayliss Utting (Trell Contractors Honda) 14 + 22 + 18 + 4 = 58

8 Liam Bennett (Apico GMR Husqvarna) 4 + 18 + 15 + 16 = 53

9 Kayde Rayns (Scott Motorsport Yamaha) 15 + 13 + 12 + 12 = 52

10 Kyron Carron (LC Construction KTM) 12 + 8 + 11 + 13 = 44

Fly Racing MXY125:

1 Reece Jones (SJP Moto KTM) 20 + 25 + 25 + 25 = 95

2 Jake Walker (Mr T Racing KTM) 18 + 20 + 22 + 22 = 82

3 Tyla Hooley (Fantic) 22 + 22 + 10 + 20 = 74

4 Freddie Gardiner (Matt Gardiner MX KTM) 25 + 11 + 12 + 18 = 66

5 Wesley McGavin (KTM) 13 + 18 + 18 + 16 = 65

6 Harrison Greenough (Simpson KTM) 14 + 16 + 16 + 12 = 58

7 Chester Hyde (Matt Pope MC Gas Gas) 15 + 15 + 13 + 13 = 56

8 Shane Jones (KTM) 16 + 14 + 14 + 10 = 54

9 Ollie Bubb (3 Flo Yamaha) 11 + 13 + 15 + 14 = 53

10 Jack Meara (Honda) 0 + 12 + 20 + 15 = 47

Syntol Big Wheel 85:

1 Josh Vail (SJP Moto KTM) 25 + 22 + 20 + 25 = 92

2 Jamie Keith (MBR X&P KTM) 20 + 25 + 22 + 22 = 89

3 Charlie Richmond (KTM) 22 + 20 + 25 + 20 = 87

4 Lewis Spratt (KTM) 16 + 18 + 15 + 16 = 65

5 Alfie Geddes-Green (Matt Pope MC Gas Gas) 18 + 8 + 18 + 18 = 62

6 Harry Lee (GRT Impact KTM) 14 + 16 + 13 + 15 = 58

7 Blake Ward-Clarke (GRT Impact KTM) 13 + 14 + 16 + 14 = 57

8 Reegan Rogers (Husqvarna) 8 + 13 + 10 + 13 = 44

9 Finlay Pickering (Mr T’s Racing KTM) 12 + 5 + 14 + 11 = 42

10 Maison Jones (Paul Green Tyres KTM) 9 + 11 + 9 + 12 = 41

Syntol Small Wheel 85:

1 Joel Winstanley-Dawson (Techsource Racing KTM) 22 + 22 + 25 + 25 = 94

2 Lucas Lee (Husqvarna) 25 + 15 + 22 + 22 = 84

3 Ollie Truman (KTM) 16 + 20 + 18 + 18 = 72

4 Archie Butterfield (KTM) 18 + 16 + 20 + 16 = 70

5 Charlie Ward (KTM) 15 + 14 + 16 + 15 = 60

6 Author Moore (3 Flo Yamaha) 20 + 18 + 0 + 0 = 58

7 Tyler Cooper (KTM) 0 + 0 + 15 + 13 = 28

8 Chad Prince (SC Sporthomes Husqvarna) 0 + 13 + 0 + 14 = 27

9 Olly Waters (Matt Gardner MX KTM) 0 + 25 + 0 + 0 = 25



Continue Reading

Latest