Connect with us
       

Uncategorized

2016 Honda CRF450 Release

All the CRF450 information is here…

Published

on

1. Introduction

Since its introduction in 2002, the Honda CRF450R has combined usable power with total control, defining the word “balance” from a rider’s perspective, and allowing professional/amateur racers and hobby enthusiast alike to extract maximum performance both from themselves and their machine. It has proven itself a big hitting package at all levels, while its reliability, longevity and build quality have set the benchmark.

And it has constantly evolved; every single model year since its inception has delivered updates from Honda’s busy competition program around the world. In 2013 it featured a brand new mass-centralised frame built around KYB air suspension USD front forks, a major step change in development focused on assisting the rider to cut super-fast lap times and turn with less effort, on the ground and in the air.

The 14YM CRF450R featured an array of detail changes to the suspension, and a significant boost to top-end engine performance, driven by Team HRC’s hard-won knowledge. The 15YM featured updates that made the CRF450R – out of the crate – about as close as it’s possible to get to the feel of a Factory MX1 racer and, in Europe, demand for the machine outstripped supply. It sold out completely.

Focus for the 2016YM CRF450R centres around upgrades to the front and rear suspension and changes in steering geometry – again driven by Team HRC’s experience at the sharp end of competition.

2. Model Overview

Having consistently re-written the rules of front-end feel the 48MM KYB Pneumatic Spring Forks (PSF2) units have received updates to improve handling, stability and front/rear suspension balance; stroke remains the same but the forks are longer, with increased outer tube rigidity.

Both compression and rebound damping rates are firmer to maintain control towards the point of bottoming out and the adjustability is increased. The rear shock too has more rebound damping in the middle-upper range of its stroke, plus works a new Pro-Link ratio. It also has a wider choice of adjustments.

The new suspension setup also drives subtle changes to the steering geometry – collectively with the aim of improving handling, feel and usability from a rider’s perspective. Other updates include a revised footpeg design and a new chain roller, more compact in size.

The 15YM CRF450R featured improved power delivery, rear-wheel traction from low-rpm up and increased peak output thanks to an HRC-spec cylinder head, exhaust pipe/mufflers and PGM-FI Dual Fuel settings. It also gained the 3-way Engine Mode Select Button (EMSB) that offers a choice of 3 riding modes for the rider to select from the right side of the handlebar. Mode 1 delivers the standard combination of ECU maps, Mode 2 serves up silky-smooth throttle control and Mode 3 returns aggressive, all-out response and power. The engine is unchanged for 2016.

3. Key Features

3.1 Chassis

The sixth generation 9.35kg aluminium twin-beam frame was designed from the outset around the 48mm KYB PSF2, working with the improved suspension performance (compared to steel springs) to deliver superb front tyre side-grip and turning ability.

And the PSF2s really build their advantage in directional stroke transitions from compression to rebound. To enhance both handling, suspension balance and stability they are now 5mm longer – stroke remains unchanged at 310mm – and feature increased outer tube rigidity just below the top yoke with a 54mm diameter (from 53.5mm).

Both compression and rebound damping forces have been increased for greater control under hard braking or when landing and the adjustment range increased from 4 click/rotate to 8 click/rotate. All adjusters are integrated into the Alumite fork caps, with high/low speed compression and high/low speed rebound damping separated on the left and right sides of each cap. Preload is adjusted via a Schrader air valve.

The compact KYB rear shock features increased rebound damping and slightly less compression, plus a new Pro-Link leverage ratio. Stroke is set at 133.5mm, with 315mm axle travel. The adjusters for high/low speed compression and rebound damping are concentrated above the reservoir for easy access.

The adjustment in fork length and shock linkage combine to make subtle – but important – changes to the steering geometry. Rake goes from 27.07° to 27°15′, with trail up 1mm to 117mm. All-up kerb weight remains 110.6kg.

Focused packaging of equipment around the frame contributes to mass centralisation; all of the electrical components – ECU, condenser, regulator and wiring harness – are lightweight and centrally located below the throttle body.

The CRF450R’s bodywork maintains Honda’s man maximum/machine minimum ethos that’s built around a rider’s needs, first and foremost. Efficient riding ergonomics are at the heart of the CRF450R shape.

In support of this the shrouds, side covers, seat and fuel tank offer a slim, smooth and continuous transition allowing the rider a great deal of freedom and flexibility of movement. The CRF decals and detailing mirror the factory racers’ look closely. Black radiator grills are employed in a hard-to-clean area. A simplified fuel hose design helps with maintenance; fuel capacity is 6.3 litres. Detailed improvements to the footpegs and their mounts make it much harder for close-packed mud to jam the footpeg in an ‘up’ position.

A 260mm wave-pattern disc delivers improved heat dissipation, power and feel from the two-piston brake caliper working it; a matching 240mm wave-pattern disc and single-piston caliper is at the rear. The fork protectors and two-piece disc cover are finished in White, while the front and rear brake guides are Black.

Lightweight aluminium rims, with directly attached spoke pattern layout reduce unsprung weight; the front is a 21 x 1.6in, the rear a 19 x 2.15in. Both wear Dunlop MX52F/MX52 tyres.

3.2 Engine

The 2016YM CRF450R uses exactly the same specification 449cc engine as the 15YM. Last year’s extensive attention by HRC resulted in increased power and torque off the very bottom with a smoothed, linear delivery through the middle plus increased peak output and extra rpm at the top end. This gave the rider confidence to get on the gas early, pick up consistent drive on and through the turn with extra rpm up top to reduce gear changing.

Bore and stroke is set at 96mm x 62.1mm, with 36mm inlet valves and 31mm exhaust valves. Compression ratio is 12.5:1, peak power is 39.5kW @ 9,000rpm with maximum torque of 48Nm arriving at 7,000rpm.

The 4-valve Unicam cylinder head and exhaust are chiefly responsible for the engine’s spectacular all-round performance and are built to the specifications raced by HRC, with exhaust ports that exit to the right, rather than left. This allows use of a shorter exhaust pipe; the twin exhaust mufflers also feature a large internal diameter and PGM-FI Dual Fuel injection matches the engine’s increased efficiency. The 46mm throttle body use a return spring that delivers a light – therefore less fatiguing – action.

For durability every gear except first is manufactured from Nickel Chrome Molybdenum. It is 10% stronger than Steel Chrome Molybdenum (SCM) material with no weight penalty. The chain roller diameter has decreased, from 38mm to 34mm.

What makes the CRF450R’s engine so usable is not simply its fluid power and torque delivery; Honda’s EMSB is the key that unlocks complete and instant adaptability at the rider’s control. This is a game changer for the average racer; rather than setup during the week and hope for the best (or take a laptop to the track) the rider – depending on conditions – just has to stop with the engine at idle and press and hold the button for just under a second to select the next map in sequence.

A highly visible LED built into the lightweight button signals the map in use with a quick press and number of subsequent flashes. If a new map is selected the choice is also confirmed to the rider.

Mode 1 uses the standard combination of ignition and fuelling maps to present a balanced power and torque delivery. Mode 2 is designed for use in slippery, muddy conditions and is all about throttle control, giving easy-to-manage feel that hunts out every last shred of traction. Mode 3 hits all-out hard with aggressive and responsive power delivery to drive through deep, soft sand. Mode 2 and 3 can be further tailored via the existing HRC setting tool for mapping hardware and software.

5. Technical Specifications

ENGINE

Type

Liquid-cooled 4-stroke single cylinder uni-cam

Displacement

449.7cc

Bore ´ Stroke

96.0mm x 62.1mm

Compression Ratio

12.5 : 1

Max. Power Output

39.5kW @ 9,000rpm

Max. Torque

48.0Nm @ 7,000rpm

FUEL SYSTEM

Carburation

Fuel injection

Fuel Tank Capacity

6.3 litres

ELECTRICAL SYSTEM

Ignition

Full transistor

Starter

Kick

DRIVETRAIN

Clutch Type

Wet multiplate

Transmission Type

Constant mesh

Final Drive

Chain

FRAME

Type

Aluminium twin tube

CHASSIS

Dimensions (L´W´H)

2,194mm x 827mm x 1,274mm

Wheelbase

1,494mm

Caster Angle

27° 15′

Trail

117mm

Seat Height

955mm

Ground Clearance

332mm

Kerb Weight

110.6kg

SUSPENSION

Type Front

Kayaba 48mm inverted PFS2 (310mm stroke)

Type Rear

Kayaba monoshock using Honda Pro-Link system (315 stroke, 133.5mm axle travel)

WHEELS

Type Front

Aluminium spoke

Type Rear

Aluminium spoke

Tyres Front

80/100-21 Dunlop MX52F

Tyres Rear

100/90-19 Dunlop MX52

BRAKES

Front

260mm hydraulic wave disc

Rear

240mm hydraulic wave disc

All specifications are provisional and subject to change without notice.

Pro Motocross

The MX Vice SMX Review Show Episode #22 – Lars Lindstrom

HRC Boss talks about their amazing 2023 season

Published

on

In 2023, MX Vice is running a regular SMX Review show, where we talk all things AMA, frequently with a star guest or pundit. This time Ben & Brad are joined by Honda HRC USA Team Manager Lars Lindstrom, talking about the red team’s amazing 2023 season, his time as Chad Reed’s mechanic, and his riders’ plans for the Motocross of Nations!


Images: HRC Honda


Lars (crouching with his arm on the front fender) has enjoyed a great year with his team in 2023

Massive thanks to Lars for joining us and we wish you and your team all the best for the rest of the year!

This podcast was recorded prior to the Washougal National, so apologies for the delay and for the few sound issues.  None of these were caused by Lars or his systems. Enjoy the podcast!



Continue Reading

Uncategorized

Live Results – AMA Pro Motocross Round 6 – Southwick

Practice Times & Race Results from The Wick

Published

on

The action is underway at Southwick for round six of the AMA Pro Motocross series. Will Jett Lawrence dominate again, and how will Hunter fare after his issues at RedBud?

Featured Image: HRC Honda

This page will have all of the results from The Wick. The results are posted in an easy-to-view fashion, with the latest results at the very top of the page. If you do not immediately see the most recent results, hit the refresh button in the top-right corner and then the issue should be rectified.

450 Updated Championship Classification

450 Overall Results

450 Moto Two

250 Updated Championship Classification

250 Overall Results

They said the sand might suit him! Tom Vialle takes his first overall win in the USA, and the 250 wildness continues through the pack as the red plate changes hands for the first time in either class this summer!

250 Moto 2

450 Moto 1

250 Moto 1

450 Consolation Race

Just for British fans, SC Sporthomes Husqvarna rider Charlie Putnam finished 19th in the Consolation Race after not making the cut in Qualifying.

250 Combined Qualifying Times


450 Combined Qualifying Times



Continue Reading

British Championship

Michelin MX Nationals – Race Report, Rnd 2 – Monster Mountain

Full report from packed event in South Wales

Published

on

Last weekend the new Monster Mountain facility staged its first event, round two of the Michelin MX Nationals powered by Milwaukee, and what an action-packed weekend it was! With almost 300 hundred riders keen to get on the new track and a tremendous crowd for the MX Nationals, both enjoyed the two days of fast and hot motocross action.

Words: Dick Law for Michelin MX Nationals | Featured Image: Michelin MX Nationals

If you haven’t seen the images and videos on social media, Monster Mountain is a USA- styled track set on top of a Welsh mountain. With months and months of hard, back-breaking work that involved moving hundreds of tons of earth with machines the size of a small house, the Monster Mountain track was born, and the scale of the project was mind-blowing. Once you have climbed up the mountain’s side to the peak, you enter a landscape that could be easily mistaken for Pala or even the moon.

The Leatt Pro MX1s were mainly about three riders, the Crendon Fastrack Honda pairing of Conrad Mewse and Josh Gilbert and Cab Screens Crescent Yamaha rider Harri Kullas. The winner would come from one of these riders, who have dominated the home racing scene all year.

Kullas got the holeshot at the start of the first combined MX1 and MX2 pro race but was quickly passed a quarter of the way around the opening lap by Mewse and then his teammate Gilbert, who had gated third, slipped by Kullas before the end of the lap. While this happened, John Adamson (ASA United GasGas) got cross threaded in one of the deep ruts and dropped from fourth to tenth.

Adamson’s teammate Ivo Monticelli, who was making a comeback from an injury he suffered at round one of the Revo series, took full advantage of his teammate Adamson’s problems and took over his fourth place as Jason Meara (JM 10 Moto-cycle Racing Honda), Tom Grimshaw (Chambers Racing), Charlie Putnam (SC Sporthomes Husqvarna), Jamie Carpenter (Cab Screens Crescent Yamaha), and Dan Thornhill (Chambers Racing) all moved up a place at Adamson’s expense.

The leading four riders of Mewse, Gilbert, Kullas, and Monticelli stayed in the same running order to the end of the race as Meara and Grimshaw fought over fifth place. The two riders changed position many times till, on lap eight, Meara suffered a mechanical failure, leaving Grimshaw to make fifth all his own.

Adamson was on a charge after his crash and fought back to sixth at the end of the race, while Putnam came off his machine, relegating himself back to thirtieth place.

The immense new track, with its long start straights and big jumps, and even an adverse camber turn, was always going to disadvantage the smaller Apico MX2 machines over the power of the Leatt MX1 machines, with Glen McCormick (Chambers Racing) being the first of the MX2s around turn one, followed by Jamie Wainwright (WPH/SBE/Redline KTM) and Carlton Husband (Phoenix EvenStrokes Kawasaki) as race favourite Charlie Cole (Blades Bikes Kawasaki) suffering a mechanical problem that saw him at the back of the pack with a lot of work to do.

Wainwright had passed McCormick to lead the MX2s by the end of the first lap as Husband slipped back three places. But, as the race continued, Husband upped his pace and repassed six other riders on his way to tenth in the race, but first MX2 home.

McCormick put on a last-lap charge and snatched a place from the hands of Wainwright as the pair finished eleventh and thirteenth on the track but second and third in the MX2s, as for the unlucky Cole. He regrouped and fought his way back from thirtieth to finish fifteenth in the race but fourth MX2 and the last person on the lead lap.

Kullas once again got the holeshot at the start of race two, and once again, Gilbert found a way past him by the end of the lap. Behind them, it was Grimshaw, Meara, Monticelli, Mewse and Carpenter.

Grimshaw took his time in the opening laps and slipped back to sixth. Mewse slid past Monticelli on the second lap to take over third place, with Meara relegated to fifth.

While Grimshaw and Carpenter fought over sixth place, the running order of Gilbert from Kullas, Mewse, Monticelli, and Meara stayed the same till the very last lap when Mewse used the backmarkers to snatch second place from Kullas, and with it second overall for the meeting. (MX Vice was witness to the incident that cost Kullas second place, where two MX2 riders fell in a rut that Harri had already committed to, leaving the Yamaha man to haul his bike out of the massively deep inside rut as Conrad tiptoed around the outside of them, probably laughing his head off!).

On the Apico MX2 side of race two, Cole had gated tenth but had Wainwright in his wheel tracks and McCormick two places further back as they battled for the MX2 lead amongst the bigger MX1 machines.

Wainwright & Cole battle for MX2 supremacy in race two. Cole won the event, but Wainwright leads the series!

After changing the lead with Wainwright several times, Cole established himself eighth on the track but first of the MX2s. Wainwright finished in tenth place for the second MX2, with McCormick third. Unfortunately, Husband didn’t get the start he wanted and didn’t seem to get going as he finished sixth MX2, behind Joe Brooks and Charlie Heyman (Tru7 Honda).           

With three race wins and a second place, Ben Edwards won the RFX expert MX1s from race one winner and wildcard rider Josh Waterman. Jayden Ashwell (AJP Geartec Husqvarna) was third, with Jay McCrum missing a podium position.

Ashley Greedy (Darjen Contractors Gas Gas) won his first three races in the RFX MX2s, but while in the lead of his fourth and final race of the weekend, he was passed by Jimmy Margetson (AJP Geartec Husqvarna) on his way to second overall, with Mathew Bayliss (Darjen Contractors Gas Gas).

Ash Greedy had a great weekend on home territory.

Wildcard rider Scott Elderfield won three out of his four races on his way to the Motoverde amateur MX1 overall, with race four winner Sean Wainwright (Fasteddy Racing Honda) second. Josh Greedy (Darjen Contractors Kawasaki) tied in third with Luke Mellows (Forty-Four Honda).

Wildcard riders took three out of the top four places in the Motoverde amateur MX2 class as Ben Clarke, with two wins and two third places, took the overall from race two winner Raife Broadley (723 Race Bikes Gas Gas) while the winner of the last race Wal Beaney was third, just five points behind the winner.

Tallon Aspden (LA Groundwork KTM), with three wins and a second place, won the Worx clubman MX1s from Darren Manning-Coe, who was second in all four of his races as Daniel Chapman, the winner of the last race of the weekend was third as Drew Lane just missed out on the podium by two points.

Sam Ongley (Fantic) won all four Spiral GFX clubman MX2 races from Matt Tolly and Charlie West.

In the youth Fly Futures MXY2s, Billy Askew (GTCi Revo Kawasaki) won all four races and remains unbeaten this year. Behind him, Domonic Newbury (426 Motorsport KTM) and Mackenzie Marshall (DK Offroad KTM) were separated by just three points as they finished the weekend in second and third overall.

Billy Askew (441) already has his nose in front of Domonic Newbury (404), Mackenzie Marshall (555) and Jak Taylor (22, WM Tatchell Husqvarna).

Reece Jones (SJP Moto Husqvarna) was third in his first race of the weekend, but from then on won the other three for first overall in the Fly MXY125s. Jake Walker (Mr T Racing KTM), who didn’t finish out of the top four all weekend, was second, with a race-three low score pushing Tyla Hooley (Fantic) down to third.

Josh Vail (SJP Moto Husqvarna), with two race wins, a second and a third place, took the overall win in the Syntol Big Wheel 85s with Jamie Keith (MBR X&P KTM), who didn’t finish out of the top three all weekend, second and Charlie Richmond third.

Josh Vail took the overall win in the Syntol Supermini Big Wheel class

With a couple of wins and two-second places, Joel Winstanley-Dawson (Techsource Racing KTM) won the Syntol small wheel 85s from race one winner Lucas Lee (Husqvarna) and Ollie Truman.

Top ten results

Leatt Pro MX1:

1 Josh Gilbert (Crendon Fastrack Honda) 22 + 25 = 47

2 Conrad Mewse (Crendon Fastrack Honda) 25 + 22 = 47

3 Harri Kullas (Cab Screens Crescent Yamaha) 20 + 20 = 40

4 Ivo Monticelli (ASA United Gas Gas) 18 + 18 = 36

5 Tom Grimshaw (Chambers Racing) 16 + 15 = 31

6 James Carpenter (Cab Screens Crescent Yamaha) 14 + 14 = 28

7 John Adamson (ASA United Gas Gas) 15 + 13 = 28

8 Dan Thornhill (Chambers Racing) 13 + 10 = 23

9 Callum Green (Tru7 Honda Academy Honda) 10 + 11 = 21

10 Stuart Edmonds (S Biggs Commercials Honda) 12 + 9 = 21

Apico Pro MX2:

1 Charlie Cole (Blades Bikes Kawasaki) 18 + 25 = 43

2 Jamie Wainwright (WPH/SBE/Redline KTM) 20 + 22 = 42

3 Glen McCormick (Chambers Racing) 22 + 20 = 42

4 Carlton Husband (Phoenix EvenStrokes Kawasaki) 25 + 15 = 40

5 Charlie Hayman (Tru7 Honda Academy Honda) 16 + 16 = 32

6 Joe Brooks (GRT Impact KTM) 13 + 18 = 31

7 Calum Mitchell (Lexa MX Husqvarna) 15 + 14 = 29

8 Bailey Johnston (Verde Shiloh KTM) 11 + 13 = 24

9 Ben Franklin (Chambers Husqvarna) 12 + 12 = 24

10 Lewis Hall (Fantic) 14 + 10 = 24

RFX Expert MX1:

1 Ben Edwards (KTM) 22 + 25 + 25 + 25 = 97

2 Josh Waterman (KTM) 25 + 22 + 22 + 20 = 89

3 Jayden Ashwell (AJP Geartec Husqvarna) 18 + 20 + 20 + 16 = 74

4 Jay McCrum (Honda) 15 + 15 + 15 + 18 = 63

5 Richard Bird (Allmoto Megabikes Yamaha) 16 + 16 + 16 + 14 = 62

6 Corrie Southwood (Langmead Kawasaki) 5 + 14 + 12 = 22 = 53

7 Ryan Thomson (Drysdale MC Gas Gas) 14 + 13 + 13 + 7 = 47

8 Josh Canton (Concept CCF KTM) 13 + 9 + 11 + 13 = 46

9 Josh Peters (Jim Aim KTM) 20 + 0 + 18 + 0 = 38

10 Aaron Patstone (Gas Gas) 9 + 8 + 10 + 10 = 37

RFX Expert MX2:

1 Ashley Greedy (Darjen Contractors Gas Gas) 25 + 25 + 25 + 22 = 97

2 Jimmy Margetson (Husqvarna) 15 + 20 + 15 + 25 = 75

3 Mathew Bayliss (Darjen Contractors Gas Gas) 20 + 22 + 14 + 13 = 69

4 Uldis Freibergs (Lexa MX Husqvarna) 16 + 15 + 16 + 20 = 67

5 Kieran Banks (Yamaha) 18 + 13 + 18 + 18 = 67

6 Henry Siddiqui (Husqvarna) 13 + 14 + 20 + 16 = 63

7 Josh Colman (Holeshot MX KTM) 22 + 16 + 22 + 0 = 60

8 Aaron Ongley (723 Racebikes Gas Gas) 10 + 12 + 9 + 14 = 45

9 Niall Cregan (CCM Motorcycles Husqvarna) 5 + 9 + 11 + 15 = 40

10 Callum Murfitt (Southside MMX KTM) 7 + 11 + 10 + 12 = 40

Motoverde amateur MX1:

1 Scott Elderfield (Kawasaki) 25 + 25 + 25 + 22 = 97

2 Sean Wainwright (Fasteddy Racing Honda) 20 + 18 + 20 + 25 = 83

3 Josh Greedy (Darjen Contractors Kawasaki) 22 + 20 + 18 + 20 = 80

4 Luke Mellows (Forty Four Honda) 18 + 22 + 22 + 18 = 80

5 Jamie Dixon (P&S Yamaha) 14 + 16 + 12 + 16 = 58

6 Joshua McCorkell (McCorkell Racing Husqvarna) 16 + 13 + 11 + 14 = 54

7 Ryan Osborn (Evotech KTM) 11 + 14 + 15 + 13 = 53

8 Callum Gordon (MX Revive Gas Gas) 12 + 15 + 13 + 10 = 50

9 Brad Thornhill (LMC Plant KTM) 9 + 12 + 14 + 12 = 47

10 Jacob Bowden (VMX Motocross Club KTM) 10 + 11 + 10 + 15 = 46

Motoverde amateur MX2:

1 Ben Clark (Gas Gas) 25 + 20 + 25 + 20 = 90

2 Raife Broadley (723 Race Bikes Gas Gas) 18 + 25 + 22 + 22 = 87

3 Wal Beaney (KTM) 22 + 18 + 20 + 25 = 85

4 Jayden Murphy (KTM) 16 + 22 + 16 + 18 = 72

5 Shaun Springer (Gas Gas) 20 + 16 + 18 + 16 = 70

6 Charlie Palmer (Apex Gas Gas) 14 + 15 + 13 + 15 = 57

7 Dan Brough (Rutzz Yamaha) 12 + 12 + 7 + 14 = 45

8 Alex Buchanan (Mace Tech Tuning KTM) 11 + 14 + 12 + 8 = 45

9 Jonathan Rodrick-Evans (KTM) 7 + 7 + 14 + 12 = 40

10 Leon Ongley (Fantic) 15 + 8 + 6 + 11 = 40

Worx Sports Insurance Clubman MX1:

1 Tallon Aspden (LA Groundwork KTM) 25 + 25 + 25 + 20 = 95

2 Darren Manning-Coe (Fabrican KTM) 22 + 22 + 22 + 22 = 88

3 Daniel Chapman (KTM) 15 + 18 + 18 + 25 = 76

4 Drew Lane (Lanes Construction Gas Gas) 20 + 20 + 16 + 18 = 74

5 Kalem Hicks (British Army MX Team Husqvarna) 16 + 16 + 15 + 15 = 62

6 Billy Saunders (WMS Commercials Honda) 18 + 0 + 20 + 16 = 54

7 Ryan Davis (KTM) 10 + 12 + 14 + 12 = 48

8 Ashley Senior (Honda) 11 + 14 + 9 + 13 = 47

9 Josh Young (KTM) 14 + 10 + 11 + 11 = 46

10 Josh Bailey (Chris Bailey Landscaping KTM) 6 + 7 + 10 + 14 = 37

Spiral Clubman MX2:

1 Sam Ongley (Fantic) 25 + 25 + 25 + 25 = 100

2 Matt Tolley (426 Motorsport KTM) 20 + 22 + 22 + 16 = 80

3 Charlie West (Tim Feeney KTM) 11 + 16 + 16 + 22 = 65

4 Bradley Johnstone (Moto Connection Kawasaki) 16 + 15 + 20 + 9 = 60

5 Chris Corthorn (Kawasaki) 10 + 20 + 9 + 20 = 59

6 George Boyce (Design Scaffolding KTM) 12 + 13 + 13 + 18 = 56

7 Matthew Pocock (MGP Steel Erection KTM) 0 + 18 + 18 + 15 = 51

8 Richy Roberts (Rutzz Racing Yamaha) 9 + 6 + 15 + 14 = 44

9 Max Flint (Planet Moto KTM) 14 + 9 + 15 + 14 = 44

10 Jordan Ambler (City Wide KTM) 18 + 12 + 0 + 11 = 44

Fly Racing MXY125:

1 Billy Askew (GTCi Revo Kawasaki) 25 + 25 + 25 + 25 = 100

2 Domonic Newbury (426 Motorsport KTM) 20 + 15 + 20 + 20 = 75

3 Mckenzie Marshall (DK Offroad KTM) 22 + 10 + 22 + 18 = 72

4 George Hopkins (HJA Motorcycles Gas Gas) 18 + 14 + 16 + 14 = 62

5 Jak Taylor (Lexa MX Husqvarna) 9 + 20 + 10 + 22 = 61

6 Fin Wilson (Husqvarna) 16 + 16 + 14 + 15 = 61

7 Bayliss Utting (Trell Contractors Honda) 14 + 22 + 18 + 4 = 58

8 Liam Bennett (Apico GMR Husqvarna) 4 + 18 + 15 + 16 = 53

9 Kayde Rayns (Scott Motorsport Yamaha) 15 + 13 + 12 + 12 = 52

10 Kyron Carron (LC Construction KTM) 12 + 8 + 11 + 13 = 44

Fly Racing MXY125:

1 Reece Jones (SJP Moto KTM) 20 + 25 + 25 + 25 = 95

2 Jake Walker (Mr T Racing KTM) 18 + 20 + 22 + 22 = 82

3 Tyla Hooley (Fantic) 22 + 22 + 10 + 20 = 74

4 Freddie Gardiner (Matt Gardiner MX KTM) 25 + 11 + 12 + 18 = 66

5 Wesley McGavin (KTM) 13 + 18 + 18 + 16 = 65

6 Harrison Greenough (Simpson KTM) 14 + 16 + 16 + 12 = 58

7 Chester Hyde (Matt Pope MC Gas Gas) 15 + 15 + 13 + 13 = 56

8 Shane Jones (KTM) 16 + 14 + 14 + 10 = 54

9 Ollie Bubb (3 Flo Yamaha) 11 + 13 + 15 + 14 = 53

10 Jack Meara (Honda) 0 + 12 + 20 + 15 = 47

Syntol Big Wheel 85:

1 Josh Vail (SJP Moto KTM) 25 + 22 + 20 + 25 = 92

2 Jamie Keith (MBR X&P KTM) 20 + 25 + 22 + 22 = 89

3 Charlie Richmond (KTM) 22 + 20 + 25 + 20 = 87

4 Lewis Spratt (KTM) 16 + 18 + 15 + 16 = 65

5 Alfie Geddes-Green (Matt Pope MC Gas Gas) 18 + 8 + 18 + 18 = 62

6 Harry Lee (GRT Impact KTM) 14 + 16 + 13 + 15 = 58

7 Blake Ward-Clarke (GRT Impact KTM) 13 + 14 + 16 + 14 = 57

8 Reegan Rogers (Husqvarna) 8 + 13 + 10 + 13 = 44

9 Finlay Pickering (Mr T’s Racing KTM) 12 + 5 + 14 + 11 = 42

10 Maison Jones (Paul Green Tyres KTM) 9 + 11 + 9 + 12 = 41

Syntol Small Wheel 85:

1 Joel Winstanley-Dawson (Techsource Racing KTM) 22 + 22 + 25 + 25 = 94

2 Lucas Lee (Husqvarna) 25 + 15 + 22 + 22 = 84

3 Ollie Truman (KTM) 16 + 20 + 18 + 18 = 72

4 Archie Butterfield (KTM) 18 + 16 + 20 + 16 = 70

5 Charlie Ward (KTM) 15 + 14 + 16 + 15 = 60

6 Author Moore (3 Flo Yamaha) 20 + 18 + 0 + 0 = 58

7 Tyler Cooper (KTM) 0 + 0 + 15 + 13 = 28

8 Chad Prince (SC Sporthomes Husqvarna) 0 + 13 + 0 + 14 = 27

9 Olly Waters (Matt Gardner MX KTM) 0 + 25 + 0 + 0 = 25



Continue Reading

Latest